Your water heater is one pretty used and costly appliances in your home, and consumes a large portion of your energy dollars each month. And experts say regular care and maintenance is essential to protecting your investment and saving with regards to your home heating as well as costs.
Regular flushing of your water heater has become single most important step you consider to prolong its service life and even save energy. In a period of time, sediments mount up in the bottom of your water heater. These sediments act as a barrier between the flame and the tank, thereby making your heater burn longer and hotter. This is not merely destructive to the tank, but highly inefficient and will significantly raise your heating costs.
In most associated with the country, the average water heater lasts 3-5 years. Regularly flushing your water heater can double living of your water heater from 3-5 to 7-10 years. To provide a source costs of replacement running from $700 to over $1200 in some cases, getting the most out of your heater is in today’s economy. In addition, regular flushing makes your water heater run more efficiently and can cut heating costs fifty percent. Depending on the volume of warm water your home uses, that can mean a savings of $20 to over $50 a month or so.
To drain your water heater, which will help should set the thermostat to pilot (if it can be a gas water heater) or turn the circuit breaker off (if it is electric heater). Failure to do so could result in overheating and severe damage to the actual heater. Next, close the water supply valve located over the water inlet line going into your water heater. You may then connect a hose to the drain valve located towards the bottom of the heater. Open the drain and allow it to play until all of the water has emptied from the air conditioner. Then close the drain. Open the water supply valve and refill the heating. You should also open a hot water faucet somewhere inside the house and stand there and watch it run for several minutes until water flows out quickly. This will allow air to vent because of the heater and the water lines. Finally, you can turn the thermostat to its regular setting (for a gas heater), or turn the circuit breakers back on (for an electric heater).
Besides regularly flushing your water heater, plumbing experts also advise adding a water treatment system to your residence to filter or condition the water so may less corrosive to your plumbing system, particularly in areas possess hard wetness. For more ways to care for and protect your home plumbing system, contact a licensed, professional plumbing contractor in your area to discuss options and merchandise to suit your needs.
Abacus Plumbing, Air Conditioning & Electrical
The Woodlands, TX
(281) 528-1610